
Warehouse Relocation in St. Charles, MO
Warehouse relocation in St. Charles should test the destination storage plan before treating every existing frame as worth moving. Building products and consumer goods operations can carry very different loads, even when both are transferring into larger distribution space along the county corridor.
More clear height creates options, not automatic permission to add loaded levels to old steel. Establish which components fit the intended loads, then decide how new and retained rows will come into service while the operation continues shipping.
Pallet Rack Relocation Begins With the Destination Elevations
The I-70, Hwy 370 and Hwy 364 growth corridor includes newer 30–40 ft clear distribution buildings. Existing storage from lower premises may need a different arrangement there. We draw the usable levels from pallet heights, handling equipment and destination obstructions rather than filling every available vertical foot.
For building products around Elm Point industrial, heavy loads can govern beam and frame selection before ceiling height becomes the limiting factor. Record the maximum intended weight at each elevation. Moving a beam upward or changing the load allocation requires a fresh capacity check for that configuration.
Riverpointe space may present a different column grid or receiving approach from the former building. Plot the row ends and truck turning paths against those fixed points. Copying the previous aisle plan can produce storage that fits on paper but interferes with replenishment.


Warehouse Relocation Decisions: Move, Replace or Add
For rack relocation, start a component schedule distinguishing manufacturer, frame dimensions, beam connection and available capacity information. Decking, pallet supports, row spacers and protection belong in that schedule too. An overall bay count conceals shortages when the destination rows have different lengths or elevations.
Inspect steel before allocation and again when disassembly exposes concealed members. Bent legs, damaged bracing or compromised beam connectors must not enter the reusable bundles. List the affected destination positions and specify replacements before assuming those positions will be ready to receive stock.
Adding rack to match requires verified compatibility and suitable ratings, not just a familiar connector shape. Where identification is incomplete, a separate new run may be preferable to joining uncertain material. The quote should distinguish that decision from ordinary replacement of a damaged member.
Keep Dispatch Ahead of the Rack Relocation Sequence
Map the items needed for current orders, the receiving appointments that cannot shift and the storage groups that can leave first. Consumer goods and 3PL inventory may transfer by account or dispatch cycle instead of moving in the same order as the old rows.
A starter group of destination bays can accept reserve before dismantling begins elsewhere. Alternatively, an available floor zone may support a limited phase if handling access and pallet assignments are defined. Neither approach removes the need to identify who transfers inventory and when each row is released.
The two-building plan marks storage still available, zones under rack work and completed locations ready for allocation. Review those boundaries with operations before changing the sequence. Continued shipping depends on usable positions and staff coordination, not merely on crews working at both addresses.
Bundle for Assembly, Not Simply for Trailer Space
Once emptied, rows are dismantled into identified groups corresponding to the destination plan. Package locking devices and small accessories so they remain traceable. Stage the first installation area's frames, beams and supports together instead of sending unrelated members in whichever order they become available.
Agree loading, freight coordination, unloading and holding-area responsibilities in writing. At the receiving building, assembly follows the drawing, with frames anchored and aligned and beams secured at their assigned elevations. Finished storage is checked against the intended arrangement and capacity information before pallets return.
Use the Move to Separate Reserve From Rotation Stock
Retaining selective access everywhere may not match the next inventory mix. Compare St. Charles pushback lanes for repeat pallets whose retrieval order is interchangeable, and pallet flow storage in St. Charles where older stock needs a defined picking direction. Added systems require their own load and pallet review.
As a division of Warehouse Equipment & Supplies Co., we have been supplying and installing warehouse equipment since 1997. Our complimentary warehouse consultation turns these choices into a drawing and separated scope. See the St. Charles storage hub and main relocation page when comparing the proposed system mix and responsibilities.
Recent Installations
A look at pallet rack installations our crews have completed for warehouses across the St. Louis metro area.










Get a Warehouse Relocation Quote
Request warehouse relocation pricing with your existing rack identification, load schedule and new floor plan. Include both building access dates and the first inventory group the destination must accept. Prefer to talk? Call (314) 338-4815.
St. Louis Pallet Racks
1118 Hampton AveSte 219
St. Louis, MO 63139
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: 8:00 AM - 6:00 PM
Sunday: Closed
St. Charles Rack Transfer Questions
Other Storage Services in St. Charles

Pallet Rack
Also called selective pallet rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Also called push back pallet rack system
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Also called flow through racking
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Also called drive through pallet racking
Deep storage lanes for bulk inventory, with forklift access inside the rack structure.
View details
Cantilever Rack
Also called cantilever warehouse racking
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Carton Flow Rack
Also called carton flow shelving
Cases advance to the picker instead of the picker hunting for cases.
View detailsWarehouse Relocation Service Areas
From St. Charles we also serve O'Fallon, Wentzville, and the rest of St. Charles County, plus the wider St. Louis metro.
Our St. Louis Business Location
Located in St. Louis, we serve the entire metro area with industrial pallet racks and warehouse storage solutions.
St. Louis Pallet Racks
Address
1118 Hampton Ave
Ste 219
St. Louis, MO 63139
Phone
(314) 338-4815Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: 8:00 AM - 6:00 PM
Sunday: Closed
Need Warehouse Relocation in St. Charles?
Call (314) 338-4815 or request a free warehouse consultation.