
Pushback Rack in St. Louis, MO
Pushback rack in St. Louis should earn its footprint by storing repeat inventory without crowding the working space an older city warehouse needs. Food and beverage reserve, packaging stock and manufacturing inputs can justify deeper lanes; an assortment of unrelated single pallets cannot.
Start with the stock profile rather than a target position count. In buildings with restricted clear height, reclaiming floor occupied by unnecessary aisles may help more than raising another beam level. The useful comparison is occupied storage with workable access, not empty positions on a drawing.
Pushback Rack Depth Starts With the Replenishment Cycle
Pushback rack configurations hold two to six pallets deep. Choose depth from the quantities held for each SKU after receiving, during ordinary dispatch and before the next replenishment. The same item may fill six positions on delivery day but occupy only two for most of its cycle.
Long lanes with persistent vacancies can surrender more space than they recover. Several shorter lanes may provide a better balance between storage and separate inventory faces. Keep unusual sizes, small quantities and loads needing individual access in selective bays alongside the denser reserve.
For printing and packaging operations in Midtown, distinguish repeated packaging inputs from job-specific materials. Assigning the entire inventory list to one depth hides that difference. Our drawing separates those groups before adding up the usable positions.


What Push Back Racking Changes at the Aisle Face
Nested carts travel along inclined rails. During loading, an incoming pallet displaces the occupied carts farther into the structure; as the driver withdraws the front load, the remaining stock advances toward the aisle under gravity. The deepest position may rest on the rails, depending on the supplied configuration.
Retrieval is LIFO: last in, first out within that lane. Each level has its own accessible face, and the truck stays outside the storage structure. Fewer aisles are possible because several pallets share one loading face, but maneuvering room in that aisle still belongs in the plan.
Brewing and beverage distribution should separate rotation requirements from storage volume. Where older lots must leave first, consider St. Louis pallet flow lanes. For large blocks of identical stock that tolerate truck entry, compare drive-in storage for the city before selecting carts.
Sizing Pushback Pallet Rack for City Building Constraints
Older St. Louis industrial stock includes buildings with 16–24 ft clear height. In North Riverfront and Carondelet, the supplied building plan must show columns, door approaches and changes in available height. A deep row that interrupts receiving traffic is not a gain, even when its nominal capacity looks attractive.
Pallet dimensions, underside construction and loaded overhang determine contact with the carts. Record the heaviest intended load, not simply an average across all products. Beam selection accounts for the supported pallet loads and system components; frame selection considers the complete elevation, level spacing and accumulated loading.
Rail assemblies and cart stacks consume vertical space too. We check load clearance and the lift truck's working reach before setting beam elevations. Different ceiling zones may require different arrangements rather than repeating one elevation throughout the building.
Adding Lanes Without Assuming Existing Steel Will Carry Them
Adding pushback pallet rack to a selective row requires more than room for carts. Manufacturer identification, connector geometry, frame condition and documented ratings must support the proposed arrangement. Photos and existing rack information help establish whether retained uprights are suitable or a separate row is the sounder option.
Installation planning identifies the storage area to empty, material staging locations and the receiving paths that must remain open. Crews assemble and align the structure, anchor frames and check cart movement using representative pallets. Lane identification and configuration-specific load ratings give operators a clear basis for use afterward.
A Scope That Operations and Purchasing Can Both Review
We are a division of Warehouse Equipment & Supplies Co., supplying and installing warehouse equipment since 1997. The complimentary warehouse consultation produces a layout and an itemized scope covering the proposed steel, lane components and installation responsibilities, with unresolved inputs identified before approval.
Review the St. Louis warehouse storage hub for the broader system mix, and our pushback rack specifications for product details. The proposal should explain why each inventory group belongs in its assigned storage zone, not merely offer the deepest available package.
Recent Installations
A look at pallet rack installations our crews have completed for warehouses across the St. Louis metro area.










Get a Pushback Rack Quote
Request a layout using your SKU quantities through a replenishment cycle, pallet construction, maximum loaded weight and building drawing. Include the existing rack identification if conversion is under consideration. Prefer to talk? Call (314) 338-4815.
St. Louis Pallet Racks
1118 Hampton AveSte 219
St. Louis, MO 63139
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: 8:00 AM - 6:00 PM
Sunday: Closed
St. Louis Lane Planning Questions
Other Storage Services in St. Louis

Pallet Rack
Also called selective pallet rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pallet Flow Rack
Also called flow through racking
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Also called drive through pallet racking
Deep storage lanes for bulk inventory, with forklift access inside the rack structure.
View details
Cantilever Rack
Also called cantilever warehouse racking
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Carton Flow Rack
Also called carton flow shelving
Cases advance to the picker instead of the picker hunting for cases.
View details
Warehouse Relocation
Teardown, labeling, transport coordination, and rack reinstallation planned around your move.
View detailsPushback Rack Service Areas
We install industrial pallet racks throughout the city and out into the surrounding metro, so multi-building operators can keep one rack standard across every site.
Our St. Louis Business Location
Located in St. Louis, we serve the entire metro area with industrial pallet racks and warehouse storage solutions.
St. Louis Pallet Racks
Address
1118 Hampton Ave
Ste 219
St. Louis, MO 63139
Phone
(314) 338-4815Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: 8:00 AM - 6:00 PM
Sunday: Closed
Need Pushback Rack in St. Louis?
Call (314) 338-4815 or request a free warehouse consultation.