--- title: "Cantilever Rack in Collinsville | STL Pallet Racks" url: https://stlouispalletracks.com/service-area/collinsville/cantilever-rack description: "Cantilever Rack in Collinsville, IL. Free layout consultation, clear scope and installation planning. Call (314) 338-4815." lang: en --- Image: Cantilever Rack warehouse system (https://stlouispalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Collinsville, Illinois # Cantilever Rack in Collinsville, IL Long trim, pipe, and construction sections near Route 157 are stacked against walls beside palletized goods. Each delivery adds another layer, and retrieving a selected length ties up the forklift and the surrounding aisle. Cantilever rack provides an open loading face for long material on arms projecting from columns. Bundle length alone does not set support spacing: stiffness, weight distribution, arm length, and the handling movement all matter. We compare single-sided and double-sided runs against your load families, available approach room, and the usable height of the building. Organize bundles on supported arms while preserving the maneuvering space for long loads. Start with your building drawing and current load information so the proposal addresses the immediate bottleneck rather than selling capacity you cannot use. (314) 338-4815: 3143384815 ## Why Collinsville Warehouses Work With Us Planning around the Route 157 commercial-industrial corridor, Horseshoe Lake Road, and nearby interstate approaches starts with how the local operation handles material, not with a standard rack diagram. Metro East distribution and service businesses connect to interstate freight routes while working in buildings of different ages and sizes. Construction supply, food distribution, parts, and regional wholesale inventory do not share one ideal storage depth. The layout needs to separate repeat reserve from customer-order access and retain working space at receiving. For this project, the central decision is straightforward: organize bundles on supported arms while preserving the maneuvering space for long loads. Cantilever warehouse racking should support material at the right points without asking the operator to twist a long load through a tight approach. We check arm ratings, column and base capacity, end overhang, and restraint for round stock. Different products may need different arm spacings instead of one nominal configuration across the entire row. As a division of Warehouse Equipment & Supplies Co., St. Louis Pallet Racks gives you a single point of contact for the free warehouse consultation, layout revisions, component questions, and installation planning. We explain what is included, identify unresolved measurements, and keep changes visible in an itemized quote. If your operating priorities change, the drawing is reviewed before material is released rather than leaving your team to work around a surprise. - Free warehouse consultation - CAD layout with storage counts - One contact for layout, delivery, and installation Image: Cantilever warehouse racking holding steel tubing (https://stlouispalletracks.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://stlouispalletracks.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Local Project Context Collinsville industrial corridor, Eastport Plaza area, Route 157 corridor. Planning around the I-55/70 and Route 157 corridor. ### Operations We Support Trucking and freight · Wholesale distribution · Construction supply · Light manufacturing ## How Cantilever Rack Works Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. 1 ### Columns and anchored bases Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick. 2 ### Arms at adjustable heights Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place. 3 ### Column spacing against sag Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly. 4 ### Single-sided or double-sided Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint. ## What Your Cantilever Rack Project Includes The layout also follows the longest bundle through its complete approach and retrieval movement. We reserve the space needed to turn and place it without obstructing neighboring pallet rows or the receiving route. Material families with different stiffness may receive separate support spacing. The approved drawing and itemized quote show those choices so arm quantity, capacity, and handling room can be reviewed together before purchase. Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs. From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out. The quote itemizes columns, bases, arms, bracing, and anchors, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Installation partners anchor bases, plumb columns, brace the run, and set arm elevations to the drawing. The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy. ### What We Need to Plan It - What are the dimensions of the product being stored, length included? - What's the typical weight per bundle? - Straight arms or inclined arms - do you need lips to hold round stock? - Single-sided along a wall, or double-sided in open floor? - What's the clear height and the reach of your handling equipment? ### Where This Service Fits - Lumber, plywood, and sheet goods - Pipe, tube, conduit, and bar stock - Steel service center inventory - Furniture, doors, and windows - Long or awkward loads currently sitting on the floor ## Recent Installations A look at pallet rack installations our crews have completed for warehouses across the St. Louis metro area. Image: Pallet rack installation (https://stlouispalletracks.com/assets/carton-flow-racking-H2DtmvUt.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/igt-6-CNybl-Fu.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/img-1220-BlIzPann.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/img-5455-C0yq4_0X.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/medco-cleveland-5-D7DpKxtQ.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/photo-aug-03-6-17-41-pm-DQQrdZni.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/photo-jul-22-6-45-56-pm-wmg2kx1X.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/photo-may-15-2026-7-28-50-pm-1-DLYETIzB.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/udf-pushback-rack-DYf4sXhO.jpg) Image: Pallet rack installation (https://stlouispalletracks.com/assets/drive-in-C9FTZ0QV.jpg) View More Projects: https://stlouispalletracks.com/projects ## Get a Cantilever Rack Quote Tell us about your Collinsville operation and we will follow up with layout planning and pricing. Prefer to talk? Call (314) 338-4815. ### St. Louis Pallet Racks 1118 Hampton Ave Ste 219 St. Louis, MO 63139 Monday - Friday: 8:00 AM - 6:00 PM Saturday: 8:00 AM - 6:00 PM Sunday: Closed ## Cantilever Rack Questions We Hear Most ### How should Collinsville facilities size cantilever arms for regional wholesale? ### Can cantilever and pallet storage share a building near the Route 157 commercial-industrial corridor? ### What handling clearance matters for cantilever rack in Collinsville? ### How is cantilever rack different from pallet rack? ### How far apart should the columns be? ### Straight arms or inclined arms? ## Other Storage Services in Collinsville ### Pallet Rack Also called selective pallet rack Every pallet reachable, every time. The baseline we size everything else against. View details https://stlouispalletracks.com/service-area/collinsville ### Pushback Rack Also called push back pallet rack system Two to six pallets deep from one aisle, without giving up much reach. View details https://stlouispalletracks.com/service-area/collinsville/pushback-rack ### Pallet Flow Rack Also called flow through racking Load one side, pick the other, and let gravity enforce first in, first out. View details https://stlouispalletracks.com/service-area/collinsville/pallet-flow-rack ### Drive-In Rack Also called drive through pallet racking Deep storage lanes for bulk inventory, with forklift access inside the rack structure. View details https://stlouispalletracks.com/service-area/collinsville/drive-in-rack ### Carton Flow Rack Also called carton flow shelving Cases advance to the picker instead of the picker hunting for cases. View details https://stlouispalletracks.com/service-area/collinsville/carton-flow-rack ### Warehouse Relocation Teardown, labeling, transport coordination, and rack reinstallation planned around your move. View details https://stlouispalletracks.com/service-area/collinsville/warehouse-relocation ## Cantilever Rack Service Areas Collinsville anchors our Madison County coverage, and we also serve Belleville, Columbia, and the entire Missouri side of the metro. Cantilever Rack in St. Louis: https://stlouispalletracks.com/service-area/st-louis/cantilever-rack Cantilever Rack in St. Charles: https://stlouispalletracks.com/service-area/st-charles/cantilever-rack Cantilever Rack in O'Fallon: https://stlouispalletracks.com/service-area/ofallon/cantilever-rack Cantilever Rack in Chesterfield: https://stlouispalletracks.com/service-area/chesterfield/cantilever-rack Cantilever Rack in Florissant: https://stlouispalletracks.com/service-area/florissant/cantilever-rack Cantilever Rack in Maryland Heights: https://stlouispalletracks.com/service-area/maryland-heights/cantilever-rack Cantilever Rack in Hazelwood: https://stlouispalletracks.com/service-area/hazelwood/cantilever-rack Cantilever Rack in Bridgeton: https://stlouispalletracks.com/service-area/bridgeton/cantilever-rack Cantilever Rack in Earth City: https://stlouispalletracks.com/service-area/earth-city/cantilever-rack Cantilever Rack in Fenton: https://stlouispalletracks.com/service-area/fenton/cantilever-rack Cantilever Rack in Valley Park: https://stlouispalletracks.com/service-area/valley-park/cantilever-rack Cantilever Rack in Wentzville: https://stlouispalletracks.com/service-area/wentzville/cantilever-rack Cantilever Rack in Columbia: https://stlouispalletracks.com/service-area/columbia/cantilever-rack Cantilever Rack in Belleville: https://stlouispalletracks.com/service-area/belleville/cantilever-rack ## Our St. Louis Business Location Located in St. Louis, we serve the entire metro area with industrial pallet racks and warehouse storage solutions. ### St. Louis Pallet Racks #### Address #### Phone (314) 338-4815 #### Business Hours ## Need Cantilever Rack in Collinsville? Call (314) 338-4815 or request a free warehouse consultation. (314) 338-4815 Call Now: 3143384815 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://stlouispalletracks.com/#business", "name": "St. Louis Pallet Racks", "alternateName": "St. Louis Pallet Racks - A Division of Warehouse Equipment & Supplies Co.", "description": "Cantilever Rack in Collinsville, IL. Free layout consultation, clear scope and installation planning. Call (314) 338-4815.", "url": "https://stlouispalletracks.com/service-area/collinsville/cantilever-rack", "telephone": "(314) 338-4815", "address": { "@type": "PostalAddress", "streetAddress": "1118 Hampton Ave Ste 219", "addressLocality": "St. Louis", "addressRegion": "MO", "postalCode": "63139", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "38.6270", "longitude": "-90.1994" }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday" ], "opens": "08:00", "closes": "18:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "sameAs": [ "https://facebook.com/stlouispalletracks", "https://linkedin.com/company/stlouispalletracks", "https://instagram.com/stlouispalletracks" ], "areaServed": [ { "@type": "City", "name": "Collinsville", "containedInPlace": { "@type": "State", "name": "Illinois" } } ] }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://stlouispalletracks.com/service-area/collinsville/cantilever-rack#service", "name": "Cantilever Rack in Collinsville", "serviceType": "Cantilever Rack in Collinsville", "description": "Cantilever Rack in Collinsville, IL. Free layout consultation, clear scope and installation planning. Call (314) 338-4815.", "url": "https://stlouispalletracks.com/service-area/collinsville/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://stlouispalletracks.com/#business", "name": "St. Louis Pallet Racks", "telephone": "(314) 338-4815" }, "areaServed": [ { "@type": "City", "name": "Collinsville", "containedInPlace": { "@type": "State", "name": "Illinois" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://stlouispalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://stlouispalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Collinsville", "item": "https://stlouispalletracks.com/service-area/collinsville" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://stlouispalletracks.com/service-area/collinsville/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How should Collinsville facilities size cantilever arms for regional wholesale?", "acceptedAnswer": { "@type": "Answer", "text": "Bundle weight, length, and stiffness determine the number of supports and the load carried at each arm. Organize bundles on supported arms while preserving the maneuvering space for long loads. We document arm, column, and base ratings rather than treating a nominal total weight as enough information to size the system." } }, { "@type": "Question", "name": "Can cantilever and pallet storage share a building near the Route 157 commercial-industrial corridor?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, with distinct loading approaches for long material and pallets. Long trim, pipe, and construction sections near Route 157 are stacked against walls beside palletized goods. Each delivery adds another layer, and retrieving a selected length ties up the forklift and the surrounding aisle. The drawing shows the longest bundle moving through the aisle so a new arm row does not obstruct neighboring pallet retrieval." } }, { "@type": "Question", "name": "What handling clearance matters for cantilever rack in Collinsville?", "acceptedAnswer": { "@type": "Answer", "text": "Allow for the complete long-load movement, including approach, turning, and placing the bundle. Arm projection alone does not establish a usable aisle. We review your equipment and support points, plus restraints for round stock where required." } }, { "@type": "Question", "name": "How is cantilever rack different from pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Pallet rack has a front beam and stores discrete, boxed loads. Cantilever has an open front, so long material loads from the side and slides in without clearing an obstruction - that's the entire reason the system exists." } }, { "@type": "Question", "name": "How far apart should the columns be?", "acceptedAnswer": { "@type": "Answer", "text": "Close enough that the load doesn't sag between arms. A common starting point puts arm spacing at roughly half the load length, with the remainder overhanging each end evenly. We check that math against your heaviest bundle before finalizing spacing." } }, { "@type": "Question", "name": "Straight arms or inclined arms?", "acceptedAnswer": { "@type": "Answer", "text": "Straight arms suit boxed, banded, or sheet goods. Inclined arms, usually fitted with a lip, keep pipe, tube, and round stock from rolling forward off the arm. Many runs mix both across different levels." } } ] } ] ```